Cordless ESD Wrist Strap (Wireless Anti-Static Wrist Band)

A cordless ESD wrist strap, often sold as a wireless anti-static wrist strap, is an anti-static wrist strap without a cord. It is an elastic conductive-yarn band with a stainless-steel back plate that sits against the skin. A screw on the housing lets you discharge yourself by touching it to a grounded metal object.

How does a wireless anti-static wrist strap work?

The back plate and conductive band keep your skin in contact with the housing. When you touch the screw on the housing to a grounded metal object, charge on your body flows to ground through the band. There is no cord, so between touches you are not connected to ground. That is why it is used for short, mobile jobs, and why you should touch a grounded point again after you stand up, walk around or handle packaging.

Specifications

ItemSpecification
Band materialElastic nylon with copper-ion complexed conductive yarn
Back plateStainless steel, in contact with the skin
Resistance1 MΩ
Band resistance< 500 Ω ±10%
Housing sizeapprox. 4 × 3.6 cm
Band17.5 cm unstretched, 1.8 cm wide, elastic and adjustable
In the pack1 wrist band + 1 spare band
ColourBlue

What a cordless anti-static wrist strap is used for

  • Office and home electronics work: upgrading a PC, swapping memory or drives, hobby repair, where no grounded workstation is set up.
  • On-site and field work: installation, maintenance and repair jobs where there is no ground point to plug a cord into.
  • Light handling while moving: picking, packing and moving boxed or bagged electronics, where a cord would catch or limit movement.
  • Training: a low-cost way to introduce static control to new staff.

How to use a cordless ESD wrist strap

Touching the cordless ESD wrist band to a grounded bench ground point to discharge

Touch the band housing to a grounded point before handling a board.

  1. Adjust the band so the stainless-steel plate sits snugly on bare skin.
  2. Before you touch a board or component, touch the screw on the housing to a grounded metal object, for example a grounded bench frame or chassis.
  3. Repeat whenever you have stood up, walked around or handled packaging.

Cordless or corded wrist strap?

 Cordless bandCorded wrist strap
Ground cordNonePU coil cord with 1 MΩ resistor, 1.8 / 2.5 / 3.0 m
How charge is removedWhen you touch the screw to a grounded objectContinuously, through the cord to the bench ground point
Freedom of movementFullLimited by cord length
Typical useOffice, home, on-site work, packingSeated work at ESD workstations
Can be checked with a wrist strap testerNoYes

For seated work at an ESD workstation, use a corded ESD wrist strap plugged into the bench ground point, and check it every shift with a wrist strap tester. More: anti-static wrist strap guide.

Cordless wrist strap FAQ

Does a wireless anti-static wrist strap work?

It removes charge each time you touch the housing to a grounded object. It does not keep you grounded between touches, so it suits short, mobile jobs rather than continuous seated work.

Can I use it to build a PC?

Yes, for occasional home jobs. Touch the screw to bare unpainted metal on the computer case before you handle each part, and again after you move away from the desk.

Request a quote for bulk or OEM cordless ESD wrist straps

📞 Contact Us Today

For bulk orders, quotes, or product guidance, get in touch with our expert team:

Email: sales2@esdbest.com
Phone: +86 137 1427 2599