ESD Wrist Strap Tester

Size:  97 x 60 x 29mm
  Mounting:  Screw Mount
  Safe Condition:  Less than 10Meg Ohm
  Power:  AC220V 60Hz
  Visual Indicators:

  Green: Safe condition

  Red: Fault condition

  Audible Alarm:  Piezo Buzzer
  Operation:  Automatic
  Weight:  90g

 

HORBEST ESD Wrist Strap Tester – Real-Time Dual Operator Monitoring System
 
The HORBEST ESD Wrist Strap Tester utilizes resistance loop technology to provide real-time continuous monitoring of ESD wrist straps. It is engineered for high-precision static protection in cleanroom and electronics manufacturing environments.
 
Key Features of ESD Wrist Strap Tester
1.Real-time dual-operator monitoring: Simultaneously monitors the ESD wrist strap status of two users to ensure consistent grounding.
2.Visual and audible alarms: Clearly indicates “Safe,” “Low Resistance,” and “High Resistance” states for each operator:
•LOW (R < 800KΩ): Yellow LED flashes with audible alarm
•PASS (800KΩ < R < 9MΩ): Green LED on
•HIGH (R > 9MΩ): Red LED flashes with audible alarm
3.High accuracy: ±10% precision for reliable monitoring.
4.Customizable range: Resistance parameters can be tailored upon request to suit different ESD wrist strap types.
5.Power supply: Input 220VAC/50Hz, output 9-12VDC/500mA.
 
Designed to meet the highest standards of ESD safety, the HORBEST ESD Wrist Strap Tester is the ideal solution for continuous wrist strap monitoring in static-sensitive work areas.

ESD Wrist Strap Tester – this product uses the high accuracy electron primary device manufacture to become, has the precision to be high, the reaction rate is quick, antijamming ability is strong, the volume is small, the weight is light, use simple and so on characteristics; Has the auto-alarm function regarding the human body skill belt joint system, may momentarily monitor against static electricity skill belt’s active status, moves the line not to have the noise,ESD Wrist Strap Tester can (individual) the working space skill belt joint system provide the reliable safeguard for against static electricity.

1. when human body skill belt joint system normal work: Does not have the sound, the green light to be bright.
2. When human body skill belt joint system abruption: Has the buzzing sound, the red candle to glitter.

* To monitor two pieces wrist strap at the same time.

* Earth system of body wrist strap in normal operation;no noise,green light

on.Earth system of body wrist strap in circuit-broken status:buzz noise,red light glittering

1.Accurate Detection: This ESD Wrist Strap Tester is equipped with a 9V Dry Battery power supply and a sensitivity accuracy of 1/2 decades, which allows for precise static electricity detection and monitoring.

2.Portable Design: The device is lightweight and easy to carry, making it a perfect choice for on-the-go usage and quick reference within labs.

3.Comprehensive Resistance Range: With a Resistivity Range of 10^2-10^12 Ohms, this tester is capable of accommodating a wide range of sample resistance, providing versatile functionality for versatile applications.

4.Easy Calibration and Maintenance: The tester’s compatibility with 9V voltage input and its simple-to-read display make it easy to calibrate and maintain for consistent performance.

5.Wide Application: Suitable for a variety of lab applications, this portable ESD Wrist Strap Tester is specifically designed to detect and monitor static electricity in wrist straps, ensuring a safe and stable working environment in labs.

📞 Contact Us Today

For bulk orders, quotes, or product guidance, get in touch with our expert team:

Email: sales2@esdbest.com
Phone: +86 137 1427 2599

Touch-Plate ESD Wrist Strap Tester (9 V battery)

This is a desktop ESD wrist strap checker for the start of each shift. The operator plugs the wrist strap cord into the tester, presses the metal touch plate, and reads one of three lights: GOOD (green), LOW or HIGH (red). It runs on a 9 V battery, so it needs no mains power and can sit at the entrance to an EPA or on any workbench.

ESD wrist strap tester showing green GOOD light during a wrist strap test
Wrist strap worn, cord plugged in, touch plate pressed: GOOD.
Short clip of a pass test in our office.

Specifications

ItemSpecification
ModelESDBEST W01
Test typeWrist strap system check (operator + band + cord), touch-plate activated
LOW (red)Below 800 kΩ
GOOD (green, with beep)800 kΩ – 9 MΩ
HIGH (red)Above 9 MΩ
Limit toleranceLower limit 800 kΩ −10 % / +0 %; upper limit 9 MΩ −0 % / +10 %
Power9 V battery (included); about 50,000 tests per battery
Ground cord2 m
Size80 × 40 × 117 mm (W × H × L)
Supplied withTester, 9 V battery, ground cord, user manual
Minimum order50 units
Wrist strap tester package contents: tester, 9 V battery, cord and manual
In the box: tester, 9 V battery, cord and manual.

How to use the wrist strap checker

  1. Fit the 9 V battery in the back of the tester.
  2. Connect the tester's 2 m ground cord to the workstation ground point.
  3. Put the wrist strap on bare skin and tighten it so the band sits snugly.
  4. Plug the wrist strap cord into the tester's jack.
  5. Press the metal touch plate marked "PRESS HERE" with a finger of the other hand.
  6. Read the light:
    • GOOD (green, with a beep): the system reads between 800 kΩ and 9 MΩ. Start work.
    • LOW (red): below 800 kΩ. The current-limiting resistor in the cord may be shorted; replace the cord.
    • HIGH (red): above 9 MΩ. Tighten the band, check that it touches skin (not a sleeve), check the snap and cord for breaks, and retest. If it still fails, replace the strap or cord.
  7. Record the result in the daily test log.

Battery: if the beep sounds but the GOOD light only flickers, replace the 9 V battery.

Putting on the strap, plugging in the cord and testing: GOOD.
Operator wearing an ESD wrist strap pressing the tester touch plate, GOOD light on
Press the plate with the hand that is free; keep the strap tight on the other wrist.

Wrist strap tester or megohmmeter?

The touch-plate tester gives a fast pass/fail answer for daily checks. A megohmmeter gives the actual number. In our own check with an ACL Model 800 (fabric strap on bare skin, operator gripping a weighted electrode), the wrist strap system measured 9.55 × 10⁶ Ω at 55.8 %RH and 29.2 °C. See the full method in how to test an ESD wrist strap.

Need straps and cords as well? See our ESD wrist straps or the ESD wrist strap guide.

ESD wrist strap tester with 9 V battery and test cord

Ordering: minimum order 50 units. Contact sales2@esdbest.com for a quote.